When most people search for an EV traction magnet, what they are really looking for is a powered electromagnet that can grip, hold, or lift ferrous surfaces on demand — whether that’s for a robotics chassis, a material-handling jig, a DIY EV repair setup, or a traction experiment on a steel surface. Unlike permanent magnets, these suction cup electromagnets only grip when energized, which gives you precise control over hold and release. The catch is that the category is dominated by generic brands, so the differences between units come down to rated holding force, voltage flexibility, and documentation quality rather than household names.
Get backup power and energy gear delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
After comparing the field, three picks stand out to me. The VORCEFVIJAU P100/40 earns my Best Overall spot thanks to its class-leading 240KG holding force and industrial-grade 24V design. The AAHSHPNV P80/38 takes Best Value because it delivers the same 120KG rating as its direct rival while supporting both 12V and 24V supplies. And the NRMGMGT 200kg model splits the difference nicely as a mid-force dual-voltage option. The main tradeoff you’ll face throughout this roundup: raw holding force versus flexibility and documentation — the biggest magnets here are single-voltage and come with almost no instructions, while the more modest units are easier to integrate.
Key Takeaways
- The VORCEFVIJAU P100/40 leads on raw holding force at 240KG, but it runs on 24V only and ships with no usage instructions — plan your own wiring and safety margins.
- Dual-voltage units like the AAHSHPNV P80/38 and NRMGMGT 200kg offer 12V/24V flexibility, making them easier to integrate into existing EV or bench power setups.
- All five picks are energized electromagnets, meaning holding force drops to zero the instant power is cut — a fail-safe for controlled release, but a hazard for unattended lifting.
- Rated holding force assumes a clean, flat, thick ferrous surface with zero air gap; real-world grip on painted, curved, or thin steel can fall well short of the sticker number.
- Third-party brand support is thin across the entire category, so fit, finish, and coil consistency matter more than brand reputation when choosing.
| AAHSHPNV P80/38 Suction Cup Electromagnet, 120KG Holding Force, DC 12V/24V Round Coil Lift Magnet |  | Best Value — dual-voltage flexibility in a compact package | Brand: AAHSHPNV | Model Number: XOBXCWFXA-E16C210A | Holding Force: 120KG (rated) | VIEW LATEST PRICE | See Our Full Breakdown |
| VORCEFVIJAU P100/40 Round Suction Cup Electromagnet, 240KG Holding Force, DC 24V |  | Best Overall — the strongest holding force in the lineup | Brand: VORCEFVIJAU | Model: P100/40 | Holding Force: 240KG (rated) | VIEW LATEST PRICE | See Our Full Breakdown |
| BMEDPUOQ P80/38 Suction Cup Electromagnet, 120KG Holding Force, DC 24V, Round Coil Lifting Magnet (1 Piece) | | Best for Simple 24V Setups — straightforward single-voltage holding | Brand: BMEDPUOQ | Model Number: P80/38 | Holding Force: 120KG (rated) | VIEW LATEST PRICE | See Our Full Breakdown |
| Strong Magnet Electromagnet 12v/24v/200kg Circular Suction Cup Traction Strong Suction Electromagnet (3, 24V) |  | Best for Experimenters — a 200kg dual-voltage wildcard | Brand: CYVLFAQN | Voltage: 12V / 24V DC | Shape: Circular suction cup | VIEW LATEST PRICE | See Our Full Breakdown |
| NRMGMGT 12V/24V 200kg Circular Suction Cup Electromagnet | | Best Mid-Force All-Rounder — 200kg grip with dual-voltage convenience | Brand: NRMGMGT | Model Number: NRMGMGT | Holding Force: 200kg (rated) | VIEW LATEST PRICE | See Our Full Breakdown |
| EV traction magnet | Brand | Voltage | Type | Quantity |
|---|---|---|---|---|
| AAHSHPNV P80/38 Suction Cup El | AAHSHPNV | DC 12V / 24V | Energized suction cup electromagnet | 1 piece |
| VORCEFVIJAU P100/40 Round Suct | VORCEFVIJAU | DC 24V | Energized suction cup electromagnet | 1 piece |
| BMEDPUOQ P80/38 Suction Cup El | BMEDPUOQ | DC 24V | Round coil suction cup electromagnet | 1 piece |
| Strong Magnet Electromagnet 12 | CYVLFAQN | 12V / 24V DC | Energized traction electromagnet | 1 unit |
| NRMGMGT 12V/24V 200kg Circular | NRMGMGT | 12V / 24V DC | Energized traction electromagnet | 1 unit |
More Details on Our Top Picks
AAHSHPNV P80/38 Suction Cup Electromagnet, 120KG Holding Force, DC 12V/24V Round Coil Lift Magnet
The AAHSHPNV P80/38 is the pick I’d point most buyers toward when budget and flexibility matter more than absolute force. Its core advantage over the nearly identical BMEDPUOQ P80/38 is the dual 12V/24V power support: you can run it from a standard automotive 12V rail for lighter duty, then step up to 24V when you need the full 120KG rating. That kind of voltage headroom is rare at this price tier and makes integration into an EV-adjacent project dramatically simpler.
The 80mm diameter, 38mm height body is compact enough to mount on a robotic arm, a fixture plate, or a traction test rig without redesigning the whole assembly. Like every electromagnet in this roundup, the magnetic field exists only while the coil is energized, which is genuinely useful — you get a clean, instant release instead of fighting a permanent magnet off a steel plate. The tradeoff is obvious: any power interruption means an immediate drop, so this is not a device for holding loads over people or in situations where a wiring fault could cause a release.
Compared with the VORCEFVIJAU P100/40 further up this list, the AAHSHPNV gives up half the rated holding force but gains voltage flexibility and a smaller mounting footprint. For most traction and holding jobs on flat steel, 120KG of rated grip is ample — provided the contact surface is clean, flat, and thick enough. The brand’s limited track record is the main reason this isn’t my top overall pick; there’s no established support channel if a unit arrives with coil issues.
Pros:- Rated 120KG holding force in a compact 80mm round body
- Accepts both 12V and 24V DC power for flexible integration
- Instant, controlled release when de-energized
- Suction cup design seats well on flat ferrous surfaces
Cons:- Requires continuous power to maintain any holding force
- Third-party brand with limited reputation and sparse documentation
- Real-world grip falls below 120KG on painted, thin, or imperfect surfaces
Best for: Hobbyists, robotics builders, and workshop users who want solid 120KG holding force with the flexibility to run on either 12V or 24V supplies.
Not ideal for: Anyone needing maximum lifting force for heavy industrial loads, or buyers who want thorough documentation and established manufacturer support.
- Brand:AAHSHPNV
- Model Number:XOBXCWFXA-E16C210A
- Holding Force:120KG (rated)
- Voltage:DC 12V / 24V
- Diameter:80mm (P80)
- Height:38mm
- Type:Energized suction cup electromagnet
- Quantity:1 piece
- ASIN:B0H7MLZ3RN
Our verdict“The most practical all-around buy for typical traction and holding work, trading raw force for welcome voltage flexibility.”
VORCEFVIJAU P100/40 Round Suction Cup Electromagnet, 240KG Holding Force, DC 24V
If raw grip is the deciding factor, the VORCEFVIJAU P100/40 is the clear winner, and that’s why it sits at the top of my ranking. With a 240KG rated holding force, it doubles the AAHSHPNV and BMEDPUOQ P80/38 units and comfortably out-pulls both 200KG models. That extra force isn’t just a bigger number — it translates directly into safety margin on imperfect surfaces. A magnet rated at 240KG on ideal steel might realistically deliver 100–150KG on a slightly curved or painted panel, which can still outperform a smaller unit on its best day.
The larger P100 body is the physical price you pay for that force. At 100mm diameter and 40mm tall, it demands more mounting space and a sturdier structure than the compact P80 options, and its 24V-only operation means you’ll need a suitable power supply rather than a car battery tap. Compared with the NRMGMGT 200kg, which accepts 12V as well, the VORCEFVIJAU is less flexible — but if your application genuinely needs industrial traction force, working around a single-voltage requirement is usually the easier problem to solve than insufficient grip.
My biggest reservation is the near-total absence of documentation. The listing provides minimal product information and no usage instructions, which means you’re on your own for wiring polarity, duty cycle, and thermal management. Electromagnets of this class heat up under continuous energization, and nothing in the listing addresses that. This pick makes the most sense for buyers who already understand electromagnet behavior and can engineer their own safety margins; newcomers should start with a smaller, better-explained unit first.
Pros:- Highest rated holding force in this comparison at 240KG
- Large P100/40 round body provides generous contact area
- Industrial-grade traction for lifting and holding ferrous metal
- Strong force margin compensates for real-world surface losses
Cons:- 24V-only operation limits power supply options
- Minimal product information and no usage instructions included
- Generic brand with no established reputation or support
- Larger and heavier than the compact P80 alternatives
Best for: Experienced users and industrial applications that need maximum holding force and can supply 24V power with proper engineering controls.
Not ideal for: Beginners, 12V-only setups, or anyone unwilling to work out wiring and thermal management without manufacturer guidance.
- Brand:VORCEFVIJAU
- Model:P100/40
- Holding Force:240KG (rated)
- Voltage:DC 24V
- Shape:Round suction cup
- Body Size Class:P100 (100mm) / 40mm height
- Type:Energized suction cup electromagnet
- Quantity:1 piece
- ASIN:B0HHJ69DF9
Our verdict“The strongest magnet here by a wide margin — best for serious traction work if you can live with 24V-only power and thin documentation.”
BMEDPUOQ P80/38 Suction Cup Electromagnet, 120KG Holding Force, DC 24V, Round Coil Lifting Magnet (1 Piece)
The BMEDPUOQ P80/38 occupies an interesting spot: it shares the exact same size class and 120KG rating as my value pick, the AAHSHPNV, but locks you into 24V-only operation. For buyers who already run a 24V bench supply or industrial control cabinet, that’s not a limitation at all — and a single-voltage coil is arguably simpler to spec since you don’t have to think about which rail gives you full performance. This model makes the most sense for fixed installations where the power system is already settled.
Where it loses ground to the AAHSHPNV is everywhere else. The two units are functionally interchangeable on paper, so the dual-voltage rival simply offers more options for the same footprint. Against the heavier hitters — the VORCEFVIJAU at 240KG or either 200kg model — the BMEDPUOQ’s 120KG rating positions it as a mid-duty tool for lighter steel plates, fixtures, and traction demos rather than serious lifting.
The operation itself is about as simple as electromagnets get: energize the coil and it grips, cut power and it releases instantly. That on/off behavior is well suited to pick-and-place jigs and quick-change holding fixtures. Just as with its sibling, the rated force assumes ideal contact — and the listing is honest enough that I’d treat 120KG as a ceiling you’ll rarely hit, not a working figure. Budget for a healthy derating on anything less than clean, flat, thick steel.
Pros:- 120KG rated holding force suitable for mid-duty holding tasks
- Simple energize-to-grip, de-energize-to-release operation
- Compact P80 form factor fits fixtures and smaller rigs
- Round suction cup design seats cleanly on flat ferrous surfaces
Cons:- 24V-only, with no 12V option unlike the AAHSHPNV equivalent
- Holding force drops instantly to zero on power loss
- Rated force depends heavily on surface flatness and air gaps
Best for: Users with an existing 24V power setup who want a no-frills, mid-force holding magnet for fixtures or lighter lifting.
Not ideal for: Anyone needing 12V compatibility, maximum holding force, or detailed setup instructions.
- Brand:BMEDPUOQ
- Model Number:P80/38
- Holding Force:120KG (rated)
- Voltage:DC 24V
- Body Size Class:P80 (80mm) / 38mm height
- Type:Round coil suction cup electromagnet
- Operation:Magnetic only when energized
- Quantity:1 piece
- ASIN:B0HG5JHCG3
Our verdict“A solid, straightforward 24V holding magnet, though the dual-voltage AAHSHPNV covers the same ground with more flexibility.”
Strong Magnet Electromagnet 12v/24v/200kg Circular Suction Cup Traction Strong Suction Electromagnet (3, 24V)
The CYVLFAQN 200kg circular suction cup electromagnet is the least documented product in this lineup, and I want to be upfront about that before anything else. The listing is sparse to the point of being uninformative: the brand’s own detail pages reference little more than the model name, and there are no wiring notes, dimensional drawings, or duty-cycle guidance. That makes this the wildcard pick for experimenters — buyers comfortable probing, measuring, and validating a device themselves rather than relying on the manufacturer.
What attracts me despite the documentation gap is the specification set: 200kg of rated holding force with both 12V and 24V support. On paper, that’s the same combination as the NRMGMGT model, and it puts this unit in an attractive middle ground — double the grip of the P80/38 magnets while retaining the voltage flexibility the VORCEFVIJAU lacks. If the listing’s specs hold up on the bench, this is arguably the best force-per-flexibility package here.
The key comparison, then, is against the NRMGMGT, because the two claim nearly identical capabilities. The NRMGMGT at least provides a slightly more coherent manufacturer description, which is why it ranks ahead. Where the CYVLFAQN earns its place is for tinkerers who don’t mind ambiguity: if you own a multimeter, a power supply, and a scale, verifying this magnet’s actual pull force yourself is a reasonable afternoon project — and you may end up with a very capable dual-voltage unit at a bargain. Buyers who want certainty out of the box should look elsewhere in this guide.
Pros:- Rated 200kg holding force — double the compact P80 units
- Supports both 12V and 24V power supplies
- Circular suction cup design for traction and holding applications
- Potentially the best force-to-flexibility combination in this lineup
Cons:- Extremely sparse listing with almost no usable product information
- No wiring instructions, dimensions, or duty-cycle data provided
- Generic brand with no verifiable track record
- Unverified specs require buyer-side testing to confirm
Best for: DIY experimenters and makers willing to verify performance themselves in exchange for 200kg force and dual-voltage flexibility.
Not ideal for: Buyers who need reliable documentation, guaranteed specifications, or a beginner-friendly out-of-box experience.
- Brand:CYVLFAQN
- Voltage:12V / 24V DC
- Shape:Circular suction cup
- Type:Energized traction electromagnet
- Quantity:1 unit
- Documentation:Minimal — listing only
- ASIN:B0H2Q1MJJY
Our verdict“A promising 200kg dual-voltage option that rewards hands-on experimenters and frustrates everyone else.”
NRMGMGT 12V/24V 200kg Circular Suction Cup Electromagnet
The NRMGMGT 200kg electromagnet lands in what I consider the sweet spot of this category: enough force for genuinely demanding work, enough flexibility to run from common power sources. Its 200kg rating sits comfortably above the two P80/38 compact magnets while remaining in a circular body that doesn’t demand the mounting real estate of the VORCEFVIJAU P100/40. Paired with 12V/24V dual-voltage support, it’s the most adaptable high-force option in this guide.
Compared directly with the CYVLFAQN unit, which claims the same numbers, the NRMGMGT comes across as the more coherent product — the manufacturer description at least explains what the device is and what it’s for, which counts for something in a category this opaque. Compared with the VORCEFVIJAU, you give up roughly 40KG of rated force but gain the ability to run from a 12V source, which matters enormously for automotive, EV, and portable applications where 24V isn’t always available.
The compromises are familiar by now: like every electromagnet here, it holds only while continuously powered, and the manufacturer’s documentation is thin on practical details like duty cycle and thermal behavior. At 200kg rated, you’ll want to derate generously for real surfaces — figure a working grip closer to half the sticker number for anything less than ideal steel contact. Treat it as a strong mid-force workhorse with a realistic margin, and it won’t disappoint.
Pros:- Strong 200kg rated holding force for demanding applications
- Runs on either 12V or 24V — ideal for EV and automotive power systems
- Compact circular suction cup body mounts easily
- Good balance of force, size, and power flexibility
Cons:- Holding force disappears the instant power is cut
- Minimal product documentation and manufacturer detail
- Rated force assumes ideal flat, clean, thick ferrous contact
Best for: EV and automotive project builders who need serious holding force but want the option to run from a 12V system.
Not ideal for: Maximum-force industrial lifting (the VORCEFVIJAU is stronger) or buyers who expect detailed manuals and support.
- Brand:NRMGMGT
- Model Number:NRMGMGT
- Holding Force:200kg (rated)
- Voltage:12V / 24V DC
- Shape:Circular suction cup
- Type:Energized traction electromagnet
- Quantity:1 unit
- ASIN:B0H65R2DWP
Our verdict“The best-balanced high-force option — strong, adaptable, and easier to power than the heavier VORCEFVIJAU.”
How We Picked
Because every product in this category comes from a third-party brand with limited reputation, I judged each magnet on the things a buyer can actually verify and the things that determine real-world performance. My criteria fell into four buckets.
Rated holding force and realistic expectations. I compared the manufacturer’s stated rating against the physical size of the unit. A compact P80 body claiming 120KG is plausible; the same claim on a visibly smaller coil would be a red flag. I also prioritized products whose ratings align with common industrial sizing conventions, because those tend to reflect actual engineering rather than marketing math.
Voltage flexibility. A magnet that accepts both 12V and 24V DC is far easier to integrate into an EV harness, a robotics bench supply, or an existing workshop setup. Single-voltage units score lower on convenience even when their force ratings are higher.
Documentation and safety design. Energized electromagnets release instantly when power drops, so clear wiring guidance and honest specifications matter. I penalized listings that ship with minimal instructions, since these are not plug-and-play devices.
Fit for the traction use case. Finally, I weighted each product for how well it serves the typical traction or lifting application: surface contact design, mounting practicality, and how the force-to-size ratio translates into grip on flat ferrous surfaces. The result is a ranking ordered by overall usefulness, not just the biggest number on the box.
| EV traction magnet | Brand | Model Number | Type | ASIN |
|---|---|---|---|---|
| AAHSHPNV P80/38 Suction Cup El | AAHSHPNV | XOBXCWFXA-E16C210A | Energized suction cup electromagnet | B0H7MLZ3RN |
| VORCEFVIJAU P100/40 Round Suct | VORCEFVIJAU | — | Energized suction cup electromagnet | B0HHJ69DF9 |
| BMEDPUOQ P80/38 Suction Cup El | BMEDPUOQ | P80/38 | Round coil suction cup electromagnet | B0HG5JHCG3 |
| Strong Magnet Electromagnet 12 | CYVLFAQN | — | Energized traction electromagnet | B0H2Q1MJJY |
| NRMGMGT 12V/24V 200kg Circular | NRMGMGT | NRMGMGT | Energized traction electromagnet | B0H65R2DWP |
Factors to Consider When Choosing Best EV Traction Magnets
Choosing an EV traction magnet comes down to four practical questions: how much force you actually need, what power you have available, what surface you’re gripping, and how much documentation you’re willing to live without. Here’s how I’d work through each one.How Much Holding Force Do You Really Need?
Rated holding force is measured under ideal lab conditions: a perfectly flat, thick, clean mild-steel surface with zero air gap. In real projects you’ll contend with paint, curvature, dust, and thinner stock, any of which can cut actual grip to half or less of the rated figure. My rule of thumb is to buy at least double the force you think you need. A 120KG-rated magnet is realistically a 50–70KG working tool; a 240KG unit gives you comfortable margin for demanding jobs. Overbuying force is cheap insurance — underbuying means a dropped load.
Voltage Compatibility and Power Planning
Dual-voltage magnets (the AAHSHPNV, NRMGMGT, and CYVLFAQN here) accept both 12V and 24V, which makes them far easier to integrate into automotive harnesses, robotics benches, and portable setups. Single-voltage 24V units like the VORCEFVIJAU and BMEDPUOQ typically deliver their full rated force only at 24V, so a 12V supply may leave you underpowered. Remember also that these are continuous-duty coils: they draw current the entire time they’re holding, so size your power supply and wiring for sustained load, not just startup, and expect the coil to warm up during long energized periods.
Energized vs. Permanent Magnets
Every product in this roundup is an energized electromagnet, and that’s deliberate — it’s what makes them useful for traction and controlled holding. The magnetic field exists only while power flows, so you get an instant, clean release with no prying or sliding. The flip side is a real safety consideration: a blown fuse, frayed wire, or power interruption drops the load immediately. Never use these to suspend loads over people, and design your rig so a sudden release is an inconvenience rather than a catastrophe.
Surface Contact and Mounting
Suction cup electromagnets depend on full face contact with flat ferrous metal. Curved panels, mesh, thin sheet steel, and non-ferrous metals like aluminum all degrade or eliminate holding force. Before buying, check that your target surface is genuinely magnetic, reasonably flat, and at least a few millimeters thick. Also consider the magnet’s footprint: a P100/40 body needs roughly 100mm of clear flat surface plus mounting clearance, while P80 units squeeze into tighter fixtures. Finally, because all five brands here are third-party names with limited support, inspect each unit on arrival — check the coil resistance, confirm clean pole faces, and test at low power before trusting the rated force.
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
