What to Know About Battery Reconditioning with Epsom Salt?

Battery Reconditioning With Epsom salt, is it really work? Imagine your surprise at relief if you came across a way to avoid the high costs of replacing your car batteries by restoring a full charge to the ones you already had. Such a magic trick would not only allow you to save a small fortune in battery replacements; you could even make such lucky money on the side by offering this service to your friends and family – even the general public.

Well, what if I told you that this is no miracle and the only thing preventing you from doing it already was the fact that you didn’t know how? What if I told you that you probably already have the ingredients and necessary materials to do this already?

You would naturally be a little skeptical, and that is fine. Such a budget-saving feat of efficiency seems almost too good to be true.

Access Now: Dead Simple Trick To Bring Any Battery Back To Life

lead acid batteries

What Is Battery Reconditioning With Epsom Salt?

The fact of the matter is that this small miracle is accomplished with an element most people keep in their bathrooms. If you are a hard-working professional of this modern-day and age, you surely understand the need for squeezing every last drop of value from the things you already have before you go and shell out more cash for new items.

So, sit back and prepare to be amazed as I will reveal to you the secrets behind reconditioning batteries with Epsom Salts. Remember that what I am about to tell you is potentially dangerous simply because of the nature of car batteries, so be sure you read the following post all the way through before beginning your own adventures in car battery reconditioning.

But, before we get into how this is done, let’s take a closer look at the benefits of reconditioning your car batteries.

Benefits of Epsom Salt Lead Acid Battery Reconditioning

Economic Benefits

The first and foremost advantage of reconditioning your car battery is avoiding the high costs of a brand new cell. The market value of a regular car battery can range anywhere between $50 and $120.

Some of the best items on the market will cost over $200. Reconditioning these batteries will not cancel this cost forever, but it will save you anywhere between 25% and 50% of your expenses for this important automotive essential.

best trick to recondition batteries

Earn a few bucks

But the economic benefits don’t stop there! If you need a reconditioned car battery, there is a good chance for your friends, family, and associates of all types will need a similar miracle as well.

If the average cost of a new battery is about $100, you can charge them a mere quarter of their expected costs by applying a little uncommon knowledge. Do this five times, and you would have made a cool $125. A decent profit for a task that, as you will see, is very simple to accomplish.

Reduce Waste

There are millions of cars on the roads right now, and the batteries they use will someday end up as waste. By reconditioning the battery, you will take a considerable bite out of the national waste problem by ensuring that all batteries are given a new lease on their natural service life.

How to Recondition Batteries with Epsom Salt

As you can see, the benefits of reconditioning batteries are extensive. So, without any further ado, let’s get right into it. But, before we begin describing the process, here are a few of the items you will need to collect to make this possible.

You will need:

Materials and Tools

  • Epsom salt
  • Steel wool or sandpaper (optional)
  • Baking soda – about 2lbs should be more than enough
  • Bucket
  • Battery load tester
  • Funnel
  • Gloves
  • Distilled water
  • Goggles
  • Toothbrush (old or new)
  • Apron
  • Voltmeter
  • Flathead screwdriver
  • Battery reconditioning charger

Once you have collected the necessary items, you are ready to begin. Carefully read these instructions before you start.

how to recondition batteries with epsom salt

  1. Safety First – be sure to wear gloves, goggles, and a suitable apron to prevent any unwanted accidents.
  2. Carefully remove the battery from its position in the car and place it on a firm workbench or table.
  3. Combine two parts of baking soda with one part of water to prepare a paste you will use to remove corrosion from the battery terminals.
  4. Break out the toothbrush and dip it into the baking soda solution. With firm and steady strokes, begin brushing the scaly corrosion from these terminals. You may need to use steel wool or a wire brush if the corrosion is extra stubborn.
  5. Once the corrosion is gone, carefully remove the battery caps with the flathead screwdriver. VERY IMPORTANT, Place these in a safe location, so they are not lost.
  6. With extreme caution, empty the electrolyte solution into your bucket.
  7. Pour about 1 lb. of baking soda into the bucket with the electrolyte solution to neutralize the acids.
  8. Next, you will need to clean out the inside of the battery. Create a 1 part distilled water and 1 part baking soda and pour this into the battery cells using the funnel. Return the battery caps to their sockets and shake the battery as well as you can to remove the lead sulfates from the interior plates. Then remove the battery caps and empty the baking soda solution into the bucket.
  9. You are now ready to prepare a new electrolyte solution. Warm up a liter of water to about 60°C so that the Epsom salts will completely dissolve. Place 8oz. of Epsom salts into the warm water and stir well until all salts are completely dissolved.
  10. Using the funnel, carefully pour this solution into the battery’s cells.
  11. If the cells are not filled, repeat steps 9 and 10 until the battery is filled with the new electrolyte solution.
  12. Return the battery caps to their proper position.
  13. Time to charge the battery. Make sure the battery charger is in slow charge mode (12V/2Amp) and allow your battery to charge for anywhere from 12 hours to a full 24 hours.
  14. Once the charge is complete, use your voltmeter to make sure the process has worked. A fully charged battery in good condition will register 12.4V – 12.43V. (Note: if the battery were not fully charged, you would need to discharge the battery and charge it once more.)
  15. Before you can use the battery, it will have to pass a load test. This is a process in itself and not very complicated. Load testers can be found at any hardware store and are fairly easy to use.

Conclusion

If you carry out this process correctly, your battery will be charged and ready for use. While this will not last as long as a brand-new battery, you will have considerably increased the service life of your old battery. Furthermore, you will now have the skill and experience to do it again.

Thanks for reading through the whole area of my write-up. I hope I had the ability to share good concepts concerning the topic. There are many points to obtain from replacing batteries.

For an extra comprehensive discussion on reconditioning old batteries, you can have a look at Ez Battery reconditioning review as they offer versatile courses about it. They have an outstanding understanding of products, and the instructor is offered in any way if you require any aid.

The knowings you obtain from these training courses can be used and also made profitable if you were such as. I have other posts that you can check out to learn more.

battery reconditioning guide for beginners

Leave a Comment